Nasiol CleaRub 505 – Fine Cut Compound

Nasiol CleaRub 505 Fine Cut Compound is a polishing compound that can be used to achieve a glossy finish on a vehicle’s surface. This product has been specifically formulated to help with the renovation of degraded paint works and helps to remove fine scratches that may appear on a car’s surface. CleaRub 505 application areas include the body of the vehicle and it is easy to use and apply, leaving behind a long-lasting glow and shine that is hard to achieve. One of the main benefits of CleaRub 505 is that it is a product that has no silicone within it, increasing the performance and effectiveness of the compound, since it cannot be washed off.

What are The Box Contents of Nasiol CleaRub 505 Fine Cut Compound ?

Within the Nasiol CleaRub 505 Fine Cut Compound box, you will find a bottle of the compound product. There are two different sizing options that are offered and customers can choose between either the 0.5 kg or the 1 kg product. Only a small amount of this compound is needed to coat a surface area and users should be sure to follow the guidelines when applying. It is recommended that CleaRub 505 Fine Cut Compound be used with the yellow Nasiol polishing pad, as this pad is ideally suited to fine cut compounds.

The Nasiol polishing pads are uniquely designed and have an air duct system that pushes out hot air, ensuring that the paintwork and surface of the vehicle are not exposed to hot air. The heat that is produced could damage the paint, but with the hole excavating the heat that is produced, your surfaces are safe.

Why Should You Use Nasiol CleaRub 505 Fine Cut Compound ?

The benefits of CleaRub 505 include the glossy finish that is left behind once the process has been completed as well as the removal of any fine scratches that may plague the surface of the vehicle. When used along with the fine cut polishing pad, this product is able to effectively remove fine scratches and leave the car looking glossy and clean, without damaging the paint. This is achieved thanks to the air channel system built into the polishing pads, which excavates the heat that is created from the friction of the rubbing of the surface. The yellow fine cut polishing pad is best suited to CleaRub 505.

When you use CleaRub 105, it is imperative that the compound be properly applied to a surface. Prior to beginning the polishing process, wash your car thoroughly. If required, use a clay bar to remove any particles left stuck on the paint and then wash your vehicle again

It is recommended that the car then be cleaned again with Nasiol Clean, to ensure that no dust, dirt or other contaminants are left behind on the surface

Masking tape can be used to protect the trims, lights and rubber parts of the vehicle. To ensure that your paint is properly protected, be sure to use the proper tools throughout the process.